Commercial piping - Cordless Systems to increase jobsite productivity
Increase your jobsite productivity using cordless systems for your full piping installation.
From aligning to leveling to drilling holes, setting/bolting anchors, fastening screws, driving screws, chiseling openings and giving your workers light to work in - Hilti has the cordless systems for you.
Aligning and leveling pipe runs
PM 40-MG Multi-line Laser Interior Laser - Green Beam Multi-line laser with 3 green lines for plumbing, levelling, aligning and squaring. Accuracy: ±2 mm at 10 m Max. operating distance (diameter): 40 m (lines), 100 m (lines, with receiver) Self-levelling range at room temperature: -3.0/ +3.0° | PR 3-HVSG A12 Indoor Rotating Laser Level Interior Laser - Green Beam Indoor rotating laser with highly visible green beam Accuracy: ±1 mm at 10 m Operating range with laser receiver (diameter): 2 - 150 m Laser class: <4.85 mW, 510-530 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040) |
Drilling holes for anchors
TE 2-A 22 Volts Cordless Rotary Hammer SDS Plus Compact, lightweight 22V cordless rotary hammer with
superior handling characteristics. Weight according to EPTA Procedure 01/2003: 2.7
kg Optimum hammer drilling range: 4 - 12 mm
Hammer drilling diameter range: 4 - 16 mm | TE 6-A 22 Volts Cordless Rotary Hammer SDS Plus Powerful D-grip 22V cordless rotary hammer
with superior concrete drilling and chipping performance. Weight according to EPTA Procedure
01/2003: 3.7 kg Optimum hammer drilling range: 6 - 16 mm Hammer drilling diameter range: 4 - 20 mm . |
TE 6-A Cordless SDS Plus Rotary Hammer
Anchoring and Bolting
Threaded Rod Suspension & Drop-in anchor Use Hilti TE 2-A 22 volt cordless SDS Plus rotary hammer or Hilti TE 6-A 22 volt cordless SDS Plus rotary hammer View Hilti HKD or HKV drop-in anchors, read more If using the Hilti HKD drop-in anchor then use the Setting Tool HKD-TE-CX you can drill holes and set the anchor with the same tool, read more . . . . . . . . | Cantilevers or Brackets Wedge anchors HST 3 read more or HST 2 read more SIW 6-AT 22 Volts Cordless Impact Wrench Anvil type: 1/2" detent pin Maximum torque: 90 Nm (1); 135 Nm (2); 213 Nm (3) Nut-busting torque: 338 Nm
Bolt tension: 95 kN SI-AT-A 22 Volts Adaptive Torque Module Accessory type: Adaptive torque module Weight according to EPTA Procedure 01/2003: 0.26 kg
Dimensions (LxWxH): 143 x 98 x 46 mm |
screw fastening and driving
SID 2 Cordless impact driver 12 volts Subcompact-class 12V brushless impact driver for when you need high torque with access and low weight. Chuck type:
1/4" hexagonal Maximum torque:
180 Nm (1) No load RPM:
gear 1: 2750 rpm Full hammering
frequency: 3988 impacts/minute
Number of
gears: 1 SF 2 Cordless compact drill driver 12 volts Subcompact-class 12V brushless drill driver for when you need access, low weight and high control. Maximum torque
(soft/hard joint): 12 Nm (soft joint), 24 Nm (hard joint) No load RPM:
gear 1: 400 rpm; gear 2: 1500 rpm Chuck clamping
range: 1 - 10 mm
Number of gears: 2 | SID 4 Cordless impact driver 22 volts Compact-class 22V cordless impact driver with 1/4" hexagonal click-in chuck for medium-duty work. Chuck type: 1/4" hexagonal click-in Maximum torque: 60 Nm (1); 110 Nm (2); 194 Nm (3) No load RPM: gear 1: 1000 rpm; gear 2: 1500 rpm; gear 3: 2700 rpm Full hammering frequency: 3500 impacts/minute Number of gears: 3 SF 4 Cordless compact drill driver 22 volts Maximum torque
(soft/hard joint): 36 Nm (soft joint), 62 Nm (hard joint) No load RPM:
gear 1: 610 rpm; gear 2: 2100 rpm Chuck clamping
range: 2 - 13 mm Number of gears: 2 |
SID 4 Cordless Impact Driver
Cutting channel, pipes, threaded rod
SCM 22-A Cordless Metal Saw 22 Volts 22V cordless circular saw for fast, precise and cold cuts in metal. Max. cutting depth: 57 mm Blade diameter: 165 mm
Base material: Metal, Sandwich panel |
Breaking/Chiseling Openings
*a coring solution could be more feasible for you, read more.
TE 60-A 36 Cordless SDS Max Rotary Hammer 36 Volts High-performance cordless SDS Max Rotary Hammer with Active Vibration Reduction and Active Torque Control for heavy-duty drilling and chiseling in concrete. Functionality: Active Torque Control (ATC), Active Vibration Reduction (AVR), Chiseling, Power reduction Optimum hammer drilling range: 18 - 40 mm Hammer drilling diameter range: 12 - 40 mm Weight according to EPTA Procedure 01/2003: 8.1 kg Rated voltage: 36 V |
|
Lighting
SL 2-A Cordless Lamp 12 Volts (Task Light) Cordless 12V LED task light with flexible head for illuminating confined and medium-sized work areas. Brightness: 500
lm Lux: 350 lx @ 1
m
Operating time: B 12/2.6: 8.8hrs (50%), 4.5hrs (100%) SL 2-A Cordless Lamp 22 Volts (Task Light) Cordless 22V LED work light for jobsites with flexible head to illuminate confined and medium-sized areas. Brightness: 500
lm Lux: 350 lx @ 1
m Operating time: B 22/2.6: 12hrs (50%), 6.5hrs (100%), B 22/3.0: 14hrs (50%), 7.5hrs (100%), B 22/5.2: 22.3hrs (50%), 13.6hrs (100%) | SL 6-A Cordless Lamp 22 Volts (Area Light) Cordless 22V LED work light with rotating head and integrated mounting options for illumination of medium to large work areas. Brightness:
3000 lm Lux: 2100 lx @
1 m
Operating time:
B 22/3.0: 5.2hrs (33%), 2.8hrs (66%), 1.9hrs (100%), B 22/5.2: 8.8hrs (33%),
4.3hrs (66%), 3.2hrs (100%), B 22/4.0: 6.8hrs (33%), 3.5hrs (66%), 2.5hrs
(100%), B 22/8.0: 13.5hrs (33%), 7hrs (66%), 5hrs (100%) . . . . . . . . . . |
more hilti piping solutions